UV-RESISTANT POLYASPARTIC TOPCOAT
Rockhard Polyaspartic Floor Coating produces impressive finishes in commercial and industrial settings for heavy traffic areas. The Rockhard Polyaspartic Floor Coating Kit exhibits superior physical properties with outstanding UV, chemical, and solvent resistance. Rockhard POLY has fast cure times and excellent adhesion to bond well to different surfaces.
This product is a best-seller for professional contractors. It will not yellow over time and provides an excellent gloss surface. This material suits inside and outside applications, including concrete flooring, countertops, natural stone, steel, and wood surfaces.
You can use Rockhard POLY as a polyaspartic garage floor coating, a flooring base coat, or a polyaspartic topcoat on decorative floors. Decorative floors include vinyl chip (flake), colored quartz, metallic epoxy, and resinous flooring finishes.
COVERAGE RATES
| System | Sqft. Per Gal | Sqft. Per Kit |
| Flake Floor Base Coat | 1 Coat @ 150 Sqft/Gal | 300 Sqft/Kit |
| Topcoat Over Flake | 1-2 Coats @ 130 Sqft/Gal | 260 Sqft/Kit |
| Solid Color Floor | 1 Coat @ 175-250 Sqft/Gal | 350-500 Sqft/Kit |
| Clear Coat | 1 Coat @ 175-250 Sqft/Gal | 350-500 Sqft/Kit |
FEATURES AND BENEFITS
- Longer working time
- Produces outstanding finishes
- Exhibits excellent physical properties
- Superior UV, chemical, and solvent resistance
- Designed to resist most battery acid spills
- Non-yellowing and excellent gloss retention
- Fast cure time with superior bonding properties
- Approved by the Canadian Food Inspection Agency (CFIA) and meets FDA and USDA requirements
APPLICATIONS
- Protective topcoat applications
- Concrete floors
- Protection from UV rays
- Garage floors
- Aircraft hangar floors
- Maintenance facilities
- Industrial shop floors
- High-traffic facilities
POLYASPARTIC FLOOR COATING - ROCKHARD POLY 2 GAL. KIT
Format: 2-gallon kit
Mix Ratio: 1:1 Ratio by Volume
Contents: Two-component, 83% solids
Material: Aliphatic Polyaspartic Polyurea Topcoat
Odor: Low Levels
Pot Life: 30 minutes
Mixing Time: 1:20 minutes
Working Time: 25-30 minutes
Drying Times: 2-4 Hours (Minimum), 12-24 Hours (Foot Traffic), 48 Hours (Heavy Traffic), 72 Hours (Maximum Chemical Resistance)
SUITABILITY SAMPLE:
Due to the condition of specific sites, always prepare an adequate number of test areas. Onsite sample approval is especially critical in substantial, heavy traffic situations or custom gloss control and coloration.
